Tips and Tricks – A diverter is an important component of a shower system that helps to control the flow of water. It diverts water from the tub spout to the showerhead, and vice versa. However, when the diverter malfunctions, it can cause water to leak from the spout or create low water pressure.
In this article, we will discuss how to fix a diverter in a shower.
What You Will Need
Before we get started, you will need a few tools to complete this task. Make sure you have the following items:
- Adjustable wrench
- Flathead screwdriver
- Allen wrench
- Replacement diverter
Step 1: Turn Off Water Supply
Before you begin any repair work, make sure to turn off the water supply to your shower. This will prevent any water from coming out while you work on the diverter.
Step 2: Remove Handle and Escutcheon
Using a flathead screwdriver, remove the handle from the shower faucet. Then, use an adjustable wrench to remove the escutcheon plate from the wall.
Step 3: Remove Diverter
Use an Allen wrench to remove the diverter from the valve body.
Step 4: Install Replacement Diverter
Insert the replacement diverter into the valve body and tighten it with an Allen wrench.
Step 5: Reassemble Shower Faucet
Replace the escutcheon plate and handle onto the shower faucet. Tighten the screws with a screwdriver and wrench as needed.
Step 6: Turn Water Supply Back On
Turn the water supply back on and test the shower to make sure the diverter is working properly.
Here are some additional tips to keep in mind when fixing a diverter in a shower:
- Make sure to turn off the water supply before starting any repair work
- Take your time and be patient when removing and installing the diverter
- Use the appropriate tools for the job
- If you are unsure about any step of the process, consult a professional plumber
Fixing a diverter in a shower may seem like a daunting task, but with the right tools and a little patience, it can be done.
Remember to turn off the water supply before starting any repair work, and take your time when removing and installing the diverter. If you are unsure about any step of the process, consult a professional plumber.
Frequently Asked Questions
- What causes a shower diverter to malfunction?
- Can a shower diverter be repaired, or does it need to be replaced?
- How do I know if my shower diverter needs to be fixed?
- How long does it take to fix a shower diverter?
- How much does it cost to fix a shower diverter?
1. What causes a shower diverter to malfunction?
There are a few common causes of shower diverter malfunctions. Over time, the diverter valve can wear out, become clogged with mineral deposits, or become damaged from hard water. Additionally, if the diverter was not installed correctly, it may fail to function properly.
2. Can a shower diverter be repaired, or does it need to be replaced?
In some cases, a shower diverter can be repaired by cleaning or replacing certain components. However, if the diverter valve itself is damaged or worn out, it will need to be replaced.
3. How do I know if my shower diverter needs to be fixed?
There are a few signs that your shower diverter may need to be fixed. These include low water pressure, water leaking from the spout when the shower is on, or water coming out of both the tub spout and showerhead simultaneously.
4. How long does it take to fix a shower diverter?
The amount of time it takes to fix a shower diverter will depend on the extent of the repair work needed. On average, it can take anywhere from 30 minutes to an hour to fix a shower diverter.
5. How much does it cost to fix a shower diverter?
The cost to fix a shower diverter can vary depending on the extent of the repair work needed and the cost of replacement parts. On average, the cost can range from $100 to $200 for a professional plumber to fix a shower diverter.
Remember, if you are unsure about any step of the process or feel uncomfortable with DIY repair work, it’s always best to consult a professional plumber to ensure that the job is done safely and correctly.